{"product_id":"doc-s-aftermarket-ferrite-ring-with-lanyard-and-clip","title":"Doc's Ferrite Ring with Lanyard and Clip","description":"\u003ch1\u003eDoc’s Ferrite Ring with Lanyard and Clip | Ground-Balance Accessory for Minelab GPZ 7000\u003c\/h1\u003e\n\u003ch2\u003eKeep Your Essential Ferrite Ring Secure, Accessible, and Ready for Ground Balancing\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDoc’s Ferrite Ring with Lanyard and Clip\u003c\/strong\u003e is a convenient ground-balancing accessory designed for use with the \u003cstrong\u003eMinelab GPZ 7000 metal detector\u003c\/strong\u003e. The included plastic lanyard and snap clip make it easy to secure the ferrite to your detecting harness, finds pouch, backpack, or other field gear.\u003c\/p\u003e\n\u003cp\u003eUsing a ferrite ring during the GPZ 7000 ground-balancing procedure provides the detector with additional reference information. This can help the detector achieve a more accurate ground balance, reduce responses from mineralized soil, and make faint gold signals easier to hear.\u003c\/p\u003e\n\u003cp\u003eThe attached lanyard keeps the ferrite close at hand when ground conditions change and helps prevent this small but important accessory from being misplaced in the field.\u003c\/p\u003e\n\u003ch2\u003eDesigned for the Minelab GPZ 7000\u003c\/h2\u003e\n\u003cp\u003eThe GPZ 7000 uses Minelab’s Zero Voltage Transmission technology and requires a different ground-balancing technique than traditional pulse-induction detectors. Passing the search coil over the ferrite while holding the Quick-Trak trigger helps provide the detector with useful calibration data.\u003c\/p\u003e\n\u003cp\u003eA properly ground-balanced detector can operate more smoothly in mineralized or changing soil conditions, allowing the operator to better distinguish potential gold targets from ground noise.\u003c\/p\u003e\n\u003ch2\u003eBasic Ground-Balancing Procedure\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eFind an open area free from metal targets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlace the ferrite ring on the ground.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn on the GPZ 7000 and complete the Noise Cancel procedure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePress and hold the Quick-Trak trigger.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSweep the coil over the ferrite and surrounding ground in a wide figure-eight pattern.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePass over the ferrite early and repeatedly during the procedure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eContinue until the detector remains quiet and stable when sweeping over the ferrite.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRelease the Quick-Trak trigger and begin detecting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAlways consult the Minelab GPZ 7000 instructions for the complete recommended ground-balancing procedure.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned for use with the Minelab GPZ 7000\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHelps support accurate ferrite-assisted ground balancing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUseful in mineralized and changing ground conditions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlastic lanyard keeps the ferrite close at hand\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlastic snap clip attaches to a harness, pouch, belt loop, or pack\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHelps reduce the chance of losing the ferrite in the field\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompact and lightweight\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConvenient replacement or spare accessory\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Detector:\u003c\/strong\u003e Minelab GPZ 7000\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNot Intended For:\u003c\/strong\u003e General target testing or detector calibration outside the manufacturer’s recommended GPZ 7000 ground-balancing procedure\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDetector Included:\u003c\/strong\u003e No\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Handling Information\u003c\/h2\u003e\n\u003cp\u003eFerrite material is brittle and may chip or break if dropped or struck against a hard surface. The lanyard helps keep the ring secured, but the ferrite should still be handled and stored carefully.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOne ferrite ring\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne plastic lanyard\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne plastic snap clip\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDoc's aftermarket Ferrite Ring with lanyard and clip\u003c\/strong\u003e is a genuine Doc’s Detecting accessory designed for durability in harsh prospecting conditions. Perfect for relic and gold hunters who want dependable gear that just works.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse case:\u003c\/strong\u003e Optimizes performance for Gold Detectors before detecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with all metal detectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Plains Prospectors\u003c\/strong\u003e support: 30‑day returns and expert advice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eTip\u003c\/span\u003e:\u003c\/em\u003e Farrite Rings are fragile and \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eSHOULD NOT BE TOSSED OR THROWN\u003c\/span\u003e to the ground. Place with care to prevent damage.\u003c\/strong\u003e\u003c\/h3\u003e","brand":"Doc's Detecting","offers":[{"title":"Default Title","offer_id":46818654552282,"sku":"Ferrite-d","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1639\/4333\/files\/20190326_165505-300x300_684041eb-1742-4330-ad50-126f98bc6384.jpg?v=1758765813","url":"https:\/\/www.highplainsprospectors.com\/products\/doc-s-aftermarket-ferrite-ring-with-lanyard-and-clip","provider":"High Plains Prospectors","version":"1.0","type":"link"}