The Gold-N-Sand Boomer Box Sluice Header Box provides prospectors with a convenient way to introduce pumped water and material into a compatible sluice box.
Designed for use with Gold-N-Sand hand-held suction dredges and other compatible water pump setups, the Boomer Box helps create a controlled flow of water into your sluice—making it a useful addition when natural stream flow isn't sufficient or when you're building a portable prospecting setup.
It's a versatile accessory for prospectors who want to get more use out of their sluice box.
Pair the Boomer Box with a compatible Gold-N-Sand hand-held suction dredge to create a compact system for moving material from cracks, crevices, and underwater locations into your sluice.
Hand-held suction equipment can be particularly useful for working:
Bedrock cracks
Crevices
Behind large rocks
Around exposed bedrock
Shallow pools
Stream bottoms
Hard-to-reach gold-bearing material
The Boomer Box provides a convenient header area where water and material can enter the sluice for processing.
The Boomer Box isn't limited to one prospecting configuration.
It can also be incorporated into setups using other compatible water pumps, allowing prospectors to create a recirculating or pumped-water sluice system where appropriate.
This can be useful when prospecting in locations where the available natural water flow isn't strong enough to efficiently operate a sluice.
Consistent water flow is an important part of successful sluicing.
A header box helps introduce water into the upper portion of the sluice before material travels across the recovery system.
This can help create a more controlled transition of water and material into the sluice compared with simply directing a hose into the top of the box.
The Boomer Box is a useful addition for prospectors putting together a compact powered recovery system.
Depending on your equipment and configuration, it can be used for:
Gold prospecting
Sluicing
Hand-held suction dredging
Crevice cleanup
Bedrock prospecting
Pump-fed sluice systems
Recirculating prospecting systems
Concentrate processing
Sampling potential gold-bearing locations
Some of the best placer gold can settle into cracks and low areas in exposed bedrock.
A hand-held suction system can help remove material from these difficult locations. The recovered material can then be directed toward the Boomer Box and into your sluice for processing.
This makes the combination especially useful for prospectors working areas containing exposed or submerged bedrock.
Gold-N-Sand Boomer Box
Sluice header box design
Designed for gold prospecting applications
Great companion for Gold-N-Sand hand-held suction dredges
Can be used with other compatible water pump setups
Helps introduce pumped water into a sluice
Provides a controlled entry point for water and material
Great for bedrock and crevice prospecting
Useful where natural stream flow is limited
Excellent for portable prospecting systems
Can be incorporated into custom prospecting setups
Compact and practical design
1 – Gold-N-Sand Boomer Box Sluice Header Box
Sluice box, hand-held suction dredge, water pump, hoses, fittings, recovery matting, and other prospecting equipment are not included unless specifically stated in the selected package.
Prospecting equipment can vary considerably in dimensions, hose sizes, water requirements, and mounting configurations.
Before ordering, verify that the Boomer Box dimensions and connections are compatible with your sluice, pump, hose, and suction equipment.
Additional hoses, adapters, clamps, fittings, mounting hardware, or other components may be required depending on your particular setup.
Rules concerning suction dredging, motorized prospecting equipment, water pumps, and disturbance of streambeds vary by location.
Always check current federal, state, and local regulations before operating suction or powered prospecting equipment. Certain waterways or jurisdictions may prohibit or restrict some prospecting methods.
The Boomer Box Sluice Header Box by Gold-N-Sand is a practical upgrade for prospectors who want to operate a sluice with a hand-held suction dredge or compatible water pump.
Whether you're pulling gold-bearing material from bedrock crevices, working an area with limited natural water flow, or putting together a portable powered sluicing system, the Boomer Box provides a convenient way to introduce water and material into your recovery setup.
Introducing the Boomer Box by Gold-N-Sand. This aftermarket sluice header box can be easily added to most 10" sluice boxes along with your X-Stream Hybrid Pro Hand Held Suction Dredge making it an in-stream power sluice.
The Boomer Box attached by sliding it onto the front edtge of the flare versus using a bucket. Its ecofriendly design is made to meet regulations that prohibit motors or batteries. It can be used for any water source, not only the hand dredge (i.e. pump).
Holes may need to be drilled on certain sluices to attach it.
Boomer Box Sluice Header Box By Gold-N-Sand for Hand Held Suction Dredge and Other Water Pumps
Can't wait to use it! Thanks for the fast shipping!
Our aim is to establish ourselves as the leading authority and primary source for all your treasure hunting and outdoor supply requirements. Our primary goal is to provide you with exceptional customer support and ensure your satisfaction throughout your entire experience with us.
As a dealer, we pride ourselves not only on being accessible to our customers via phone, but we also actively encourage you to reach out and engage in discussions about your specific needs, skill level, or just to chat a bit about our hobbies.
We are committed to providing ongoing support and assistance to better guarantee your success in your treasure hunting endeavors.
At High Plains Prospectors, the support doesn't end with the sale.